1、1300型砂光机，两侧采用25号槽钢，（其它厂家采用的都是20号），整体框架大，整机重量比其它厂家重300多公斤，稳定性好。

2、我公司生产的所有砂光机机型，均采用目前中国唯一的光电、光电板自动吹尘装置，决不会出现因灰尘挡住光电而打碎砂带等故障。（一条砂带150多元呀）

3、我公司所有砂光机配置的均是德国产SIENLING（西格林）品牌的输送带，耐拉力强，寿命长。（其它厂家多采用国产带）

4、所有砂光机光电传感器采用日本原装OMRON红外线光电。

5、所有砂光机摆动控制装置采用台湾亚德克电磁阀，可连续使用五千万次以上。

6、所有砂光机的主电机采用的是中国四大出口电机之一的华力集团电机。

7、我公司所有设备采用5回路故障显示装置。

8、我公司所有设备均采用停机断电保护、自动下降保护装置。

9、输送床为花岗岩，比铁更耐磨，永不变形。

Features of Sanding Machines:

1.Sanding  machine has a large frame and good stability.Steel tand # 25 is used on 1300 sanding machine,steel tank # 18 on 1000 sanding machine and steel tank #16 on 630 sanding machine.

2.Exclusive automatic cleaning device makes it possible to clean the dust on the belt,improve the sanding quality and lengthen the service of the belt.

3.German Siegling belt ensures a good cxtension and duration.

4.Japanese Omron infrared radiation is adopted.

5.Swinging control device adopts Taiwan Airtac electromagnetic valve,which can be used more than 50 million times continuously.

6.Siemens electronic motor is adopted.

7.Sanding machine equipped with five caution lights to display respectively errors in five different circuits.

8.Sanding machine will be switched off and working table will fall down automatically when stopping working.

9.Working table is made of granite,whice is more wearable and never deformed.

10.French Schneider electronic device is adopted.

11.Bearings exclusively used by NSK are adopted.

12.Front roller applies.the eccentricity adjustment.